Weather |  Futures Markets |  Livestock |  Grain |  Cotton II News |  Futures |  Market News |  Headline News |  DTN Ag Headlines |  Charts |  US Ag News 
- DTN Headline News
Robots in the Field
Tuesday, August 20, 2019 2:50PM CDT
By Russ Quinn
DTN Staff Reporter

OMAHA (DTN) -- The "Silicon Prairie" is alive and well in Lincoln, Nebraska, which is good news with an ever-increasing world population to feed.

Research at the University of Nebraska-Lincoln (UNL) is pushing the boundaries of precision agriculture. These discoveries could alter the way farmers operate and monitor crops, allowing them to become even more efficient in the future.

FITBIT-LIKE SENSOR

James Schnable, assistant professor in the UNL Department of Agronomy and Horticulture, and colleagues from Iowa State University are working on creating sensors that can measure how much water an individual plant is using. This technology is similar to popular personal monitoring systems such as Fitbit.

These products use wireless-enabled wearable technology devices that measure such things as number of steps walked, heart rate and other personal metrics. These plant-mounted sensors will measure sap flow, according to Schnable.

Sap flow is an important indicator of how much water a plant is using as leaves open pores to allow carbon dioxide in. However, water can be lost in the photosynthesis process. More water lost will ultimately lower yields, he said.

Schnable said measuring sap flow hourly or even minute by minute could help researchers better understand how crops respond to stressful conditions such as drought. This data could not only help plant breeders develop different genetic lines more efficiently, but it could also assure farmers they are applying enough irrigation water to their crops.

"It's like a snapshot of a bank account," Schnable told DTN. "We want to monitor how much is being pulled out of the account."

Schnable said farmers are using some sensor technology, such as those gauging how much fertilizer/irrigation water has been applied or needs to be applied. Individual plant sensors would represent another level of this technology.

SEVERAL CHALLENGES

The challenge in creating stalk-worn sensors are two-fold, he said.

One issue is creating a device that could stretch around the stem of the plant but still be light enough to be removable. Another issue is creating sensors small enough to fit on a plant stem.

About a year ago, Schnable received an award from the National Science Foundation (NSF) to measure rates of sap flow in real time. He then contacted Liang Dong, a professor of electric engineering at Iowa State, to create a design that could work.

After some brainstorming, they came up with a low-cost sensor that could be used in a field setting.

"Dr. Dong came out of the biomedical field, which is why he knows how to build wearable sensors," he said. "We're coming at the same problem from completely different backgrounds."

Schnable said the first sensors will be applied to plants in a UNL greenhouse this December. This setting will allow researchers to double-check the data from the sensors by weighing plants and soil to figure out how much water is lost, he said.

If this process works well, the sensors will then be put on plants in small research plots in various research farms in different parts of Nebraska next spring. This will be done to catch drought conditions in at least one location, he said.

As for the future, Schnable said it's difficult to predict if this technology could someday be applied to commercial agriculture. However, the fact both plant breeders and farmers could benefit from this data does lead one to believe this product could have a place in agriculture in the future.

"I think the infrastructure is there for a product like this to be a great value to farmers someday," he said.

ROBOT INVADES FIELD

Across campus Santosh Pitla, associate professor of advanced machinery systems, and master's grad students have spent four years developing Flex-Ro. Short for Flexible Robot, the device has four wheels and a 60-horsepower Kutoba gas engine weighing about 3,000 pounds, which can be controlled remotely and is capable of being fully autonomous.

The Flex-Ro uses a design in which each wheel can be controlled individually that allows for different types of steering. This spring marks the first time the Flex-Ro has been present in a one-acre plot at the UNL research farm near Mead, Nebraska.

Pitla said the idea behind the Flex-Ro is making the robot as useful as possible. It could help in crop scouting as well as actual operations in crop production, he said.

The device can collect data through onboard sensors used to measure such things as reflectance, plant height, temperature and humidity. Other possible applications include targeted spot spraying or weeding and even planting operations.

"These machines could work 20 hours a day all throughout the growing season looking for problems and then solving the problems," Pitla said.

SUPERVISED AUTONOMOUS

Pitla said he envisions the machines could be fully autonomous while being supervised by a person. The Flex-Ro has obstacle sensors on it to prevent the robot from running into objects and would need to be trailered to a field, he said.

A supply truck could be parked near the field and a person would still need to be present to load both fuel and seed in a possible two-row planter Flex-Ro. This would still save some labor as just one person will be needed, he said.

Pitla said five Flex-Ro machines could be someday working in a field in five different zones, each programmed to work on a task. The challenge would be if these five machines were all doing different tasks instead of all five doing the same task such as planting or spraying.

"Multiple robot systems have to communicate with each other and all doing the same job would be easier to establish while machines accomplishing different tasks would be more challenging," he said.

Pitla believes the Flex-Ro could be a product which, in the future, could aid both researchers with a few acres of plots to farmers with thousands of acres. However, there are some hurdles to overcome, he said.

More testing in real field situations would be needed as the proof of concept would have to be shown, he said. In addition, there is the question of obtaining the funding needed to build these machines.

Still it is an interesting idea with many possibilities, Pitla said.

"We have had a lot of positive feedback," he said.

Russ Quinn can be reached at russ.quinn@dtn.com

Follow him on Twitter @RussQuinnDTN

(BAS/CZ)


blog iconDTN Blogs & Forums
DTN Market Matters Blog
Editorial Staff
Monday, August 19, 2019 11:39AM CDT
Friday, August 16, 2019 9:01AM CDT
Monday, August 12, 2019 12:26PM CDT
Technically Speaking
Editorial Staff
Monday, August 19, 2019 8:43AM CDT
Monday, August 12, 2019 8:51AM CDT
Monday, August 5, 2019 8:34AM CDT
Fundamentally Speaking
Joel Karlin
DTN Contributing Analyst
Thursday, August 15, 2019 9:59AM CDT
Tuesday, August 6, 2019 1:25PM CDT
Wednesday, July 31, 2019 12:57PM CDT
DTN Ag Policy Blog
Chris Clayton
DTN Ag Policy Editor
Wednesday, August 14, 2019 5:06PM CDT
Tuesday, August 13, 2019 11:41AM CDT
Friday, August 9, 2019 4:27PM CDT
Minding Ag's Business
Katie Behlinger
Farm Business Editor
Friday, August 9, 2019 12:57PM CDT
Thursday, July 25, 2019 1:43PM CDT
Wednesday, July 3, 2019 2:19PM CDT
DTN Ag Weather Forum
Bryce Anderson
DTN Ag Meteorologist and DTN Analyst
Wednesday, August 21, 2019 11:36AM CDT
Tuesday, August 20, 2019 6:25PM CDT
Friday, August 16, 2019 2:37PM CDT
DTN Production Blog
Pam Smith
Crops Technology Editor
Friday, August 16, 2019 3:27PM CDT
Friday, August 16, 2019 3:27PM CDT
Tuesday, July 30, 2019 1:41PM CDT
Harrington's Sort & Cull
John Harrington
DTN Livestock Analyst
Thursday, August 1, 2019 11:33AM CDT
Monday, July 29, 2019 5:10PM CDT
Tuesday, July 9, 2019 2:22PM CDT
South America Calling
Editorial Staff
Wednesday, August 7, 2019 8:34AM CDT
Tuesday, July 16, 2019 8:46AM CDT
Tuesday, April 23, 2019 2:43PM CDT
An Urban’s Rural View
Urban Lehner
Editor Emeritus
Tuesday, August 20, 2019 2:18PM CDT
Thursday, August 8, 2019 5:45PM CDT
Thursday, August 1, 2019 11:12AM CDT
Machinery Chatter
Dan Miller
Progressive Farmer Senior Editor
Tuesday, August 6, 2019 11:10AM CDT
Wednesday, July 31, 2019 2:04PM CDT
Thursday, July 25, 2019 3:26PM CDT
Canadian Markets
Cliff Jamieson
Canadian Grains Analyst
Wednesday, August 21, 2019 5:18PM CDT
Tuesday, August 20, 2019 3:46PM CDT
Monday, August 19, 2019 4:44PM CDT
Editor’s Notebook
Greg D. Horstmeier
DTN Editor-in-Chief
Tuesday, August 6, 2019 12:29PM CDT
Friday, July 19, 2019 5:43PM CDT
Wednesday, May 1, 2019 5:59PM CDT
 
Copyright DTN. All rights reserved. Disclaimer.
Powered By DTN